Bit Switches
D393 74 SM
Note that manual tx and rx are not possible with
this setting.
4-7
Not used
Do not change these settings.
System Switch 0F [SP No. 1-101-016]
No FUNCTION COMMENTS
Country/area code for functional
settings (Hex)
00: France 11: USA
01: Germany 12: Asia
02: UK 12: Asia
03: Italy 13: Japan
04: Austria 14: Hong Kong
05: Belgium 15: South Africa
06: Denmark 16: Australia
07: Finland 17: New Zealand
08: Ireland 18: Singapore
09: Norway 19: Malaysia
0A: Sweden 1A: China
0-7
0B: Switzerland 1B: Formosa
This country/area code determines the
factory settings of bit switches and RAM
addresses. However, it has no effect on the
NCU parameter settings and communication
parameter RAM addresses.
Cross reference
NCU country code:
SP No. 2-103-001 for G3-1
SP No. 2-104-001 for G3-2
SP No. 2-105-001 for G3-3
To Next Page
Loading...
