Error Codes
D545 34 SM
Code Meaning Suggested Cause/Action
14-08
Data Send to SMTP Server
Failed (5XX)
Failed to access the SMTP server because the
transmission failed.
SMTP server operating incorrectly
Destination folder setting incorrect.
Direct SMTP sending not operating correctly.
Software application error.
14-09
Authorization Failed for
Sending to SMTP Server
POP-Before-SMTP or SMTP authorization
failed.
Incorrect setting for file transfer
14-10 Addresses Exceeded
Number of broadcast addresses exceeded the
limit for the SMTP server.
14-11 Buffer Full
The send buffer is full so the transmission
could not be completed. Buffer is full due to
using Scan-to-Email while the buffer is being
used send mail at the same time.
14-12 Data Size Too Large
Transmission was cancelled because the
detected size of the file was too large.
14-13 Send Cancelled
Processing is interrupted because the user
pressed Stop.
14-14 Security Locked File Error
Update the software because of the defective
software.
14-15 Mail Data Error
The transmitting a mail is interrupted via DCS
due to the incorrect data.
Update the software because of the defective
software.
14-16
Maximum Division Number
Error
When a mail is divided for the mail
transmission and the division number of a mail
are more than the specified number, the mail
transmission is interrupted.
Update the software because of the defective
software.
To Next Page
Loading...
