Service Tables
D545 62 SM
106
Initialize Security Bit Switches
000
Initializes only the security bit switches. If you select
automatic output/display for the user parameter switches, the
security settings are initialized.
4.2.6 SP6-XXX (REPORTS)
6
Mode No. Function
101
System Parameter List
000 -
Touch the “ON” button to print the system
parameter list.
102
Service Monitor Report
000 -
Touch the “ON” button to print the service
monitor report.
103
G3 Protocol Dump List
001
G3 All
Communications
Prints the protocol dump list of all
communications for all G3 lines.
002
G3-1 (All
Communications)
Prints the protocol dump list of all
communications for the G3-1 line.
003
G3-1
(1 Communication)
Prints the protocol dump list of the last
communication for the G3-1 line.
004
G3-2
(All Communications)
Prints the protocol dump list of all
communications for the G3-2 line.
005
G3-2
(1 Communication)
Prints the protocol dump list of the last
communication for the G3-2 line.
006
G3-3
(All Communications)
Prints the protocol dump list of all
communications for the G3-3 line.
007
G3-3
(1 Communication)
Prints the protocol dump list of the last
communication for the G3-3 line.
To Next Page
Loading...
