Bit Switches
SM 99 D545
Fax option
Type C5501
D545
Printer Switch 0E (SP No. 1-103-015)
No Function Comments
0
Paper size selection priority
0: Width
1: Length
0: A paper size that has the same width
as the received data is selected first.
1: A paper size which has enough length
to print all the received lines without
reduction is selected first.
1
Paper size selected for printing A4
width fax data
0: 8.5" x 11" size
1: A4 size
This switch determines which paper size
is selected for printing A4 width fax data,
when the machine has both A4 and 8.5" x
11" size paper.
2
Page separation
0: Enabled
1: Disabled
1: If all paper sizes in the machine require
page separation to print a received fax
message, the machine does not print the
message (Substitute Reception is used).
After a larger size of paper is set in a
cassette, the machine automatically
prints the fax message.
3-4
Printing the sample image on reports
"Same size" means the sample image is
printed at 100%, even if page separation
occurs.
User Parameter Switch 19 (13H) bit 4
must be set to "0" to enable this switch.
Refer to Detailed Section Descriptions for
more on this feature.
Bit 4 Bit 3 Setting
0 0 The upper half only
0 1
50% reduction
(sub-scan only)
1 0 Same size
1 1 Not used
5-6 Not used Do not change the settings.
7
Equalizing the reduction ratio among
separated pages
(Page Separation)
0: Enabled
0: When page separation has taken
place, all the pages are reduced with the
same reduction ratio.
1: Only the last page is reduced to fit the
To Next Page
Loading...
