Electrical Components
D086/D087 4-170 SM
NOTE: The value of the total counter is reset to "0" when the NVRAM is
replaced.
17. Do Process Control Self-check.
18. Do ACC for the Copier function.
19. Do ACC for the Printer function.
NOTE: Do all of the following if SP5-824-001 (NVRAM Data Upload) and
SP5-825-001 (NVRAM Data Download) cannot be performed for some
reason:
20. Replace the NVRAM and Security SD card together as a set with new ones.
21. Manually enter all data on the SMC report (factory settings).
22. Enter the serial number and destination code.
NOTE: Serial Number and Destination require a special access procedure;
contact the Hotline for regional escalation.
23. Install a new Security SD functions (Data overwrite and HDD encryption) again.
To Next Page
Loading...
