Main SP Tables-2
SM 5-95 D086/D087
System
Maintenance
2572
[Thick 2: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
plate at the paper leading edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side *ENG
[0 to 50 / 0 / 2mm/step]
002 Paper Transfer: 2nd Side *ENG
003 Separation DC: 1st Side *ENG
004 Separation DC: 2nd Side *ENG
2573
[Thick 2: Trailing Edge Correction] Thick 2 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
edge in each mode. SP2553 and SP2558 are multiplied by these SP values.
The paper trailing edge area can be adjusted with SP2574.
001 Paper Transfer: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
002 Paper Transfer: 2nd Side *ENG
003 Separation DC: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
004 Separation DC: 2nd Side *ENG
[0 to 400 / 100 / 5%/step]
2574
[Thick 2: Switch Trailing Edge Correction]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
plate at the paper trailing edge between the erase margin area and the image
area.
001 Paper Transfer: 1st Side *ENG
[0 to 50 / 0 / 2 mm/step]
002 Paper Transfer: 2nd Side *ENG
003 Separation DC: 1st Side *ENG
004 Separation DC: 2nd Side *ENG
To Next Page
Loading...
