Main SP Tables-2
SM 5-105 D086/D087
System
Maintenance
007 Paper Transfer: 2nd Side: S2 *ENG
[100 to 600 / 100 / 5%/step]
297 mm > S2 size > 275 mm
(Paper width)
008 Paper Transfer: 2nd Side: S3 *ENG
[100 to 600 / 430 / 5%/step]
275 mm > S3 size > 210 mm
(Paper width)
009 Paper Transfer: 2nd Side: S4 *ENG
[100 to 600 / 100 / 5%/step]
210 mm > S4 size > 148 mm
(Paper width)
010 Paper Transfer: 2nd Side: S3 *ENG
[100 to 600 / 600 / 5%/step]
148 mm > S5 size (Paper
width)
2674
[Thick 4: Leading Edge Correction] Thick 4 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode. SP2671 and SP2672 are multiplied by these SP values.
The paper leading edge area can be adjusted with SP2675.
001 Paper Transfer: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
002 Separation DC: 1st Side *ENG
2674
Adjusts the correction to the discharge plate current at the paper leading edge
in each mode. SP2670 is multiplied by these SP values.
The paper leading edge area can be adjusted with SP2655.
003 Paper Transfer: 2nd Side *ENG
[0 to 400 / 100 / 5%/step]
004 Separation DC: 2nd Side *ENG
To Next Page
Loading...
