Main SP Tables-2
SM 5-107 D086/D087
System
Maintenance
2680
[Thick 4: Environment Correction] Thick 4 Paper: MM Environment Coefficient
Adjustment
Adjusts the environment coefficient for each mode. When the environment is
detected as MM, SP2671 and SP2672 are multiplied by these SP values.
001 Separation DC: 1st Side *ENG
[1 to 60 / 22 / 1 /step]
002 Separation DC: 2nd Side *ENG
Adjusts the environment coefficient for each mode. When the environment is
detected as MM, SP2670 is multiplied by these SP values.
003 Paper Transfer: BW: 1st Side *ENG
[1 to 60 / 11 / 1 /step]
004 Paper Transfer: BW: 2nd Side: *ENG
005 Paper Transfer: FC: 1st Side *ENG
[1 to 60 / 55 / 1 /step]
006 Paper Transfer: FC: 2st Side *ENG
[1 to 60 / 11 / 1 /step]
2751
[Special1: Bias]
Adjusts the DC voltage of the discharge plate for special paper 1.
Plain: High speed, Thick 1: Middle speed
001 Separation DC: Plain: 1st Side *ENG
[0 to 4000 / 0 / 10 –V/step
002 Separation DC: Plain: 2nd Side *ENG
003 Paper Transfer: Thick 1: 1st Side *ENG
2753
[Special1: Bias: BW]
Adjusts the current for the paper transfer roller for special paper 1 in
black-and-white mode.
P Plain: High speed, Fine: Low speed
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 250 / 22 / 1 –
A /step]
002 Paper Transfer: Plain: 2nd Side *ENG
003 Paper Transfer: Plain: 1st Side *ENG
[0 to 250 / 11 / 1 –
A /step]
To Next Page
Loading...
