Main SP Tables-2
D086/D087 5-110 SM
2772
[Special 1: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
plate at the paper leading edge between the erase margin area and the image
area.
Plain: High speed, 1200: Low speed
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 50 / 0 / 2 mm/step]
002 Paper Transfer: Plain: 2nd Side *ENG
003 Paper Transfer: 1200: 1st Side *ENG
[0 to 50 / 0 / 1 mm/step]
005 Separation DC: Plain: 1st Side *ENG
[0 to 50 / 0 / 2 mm/step]
006 Separation DC: Plain: 2nd Side *ENG
007 Separation DC: 1200: 1st Side *ENG
2773
[Special 1: Trailing Edge Correction] Special 1 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
edge in each mode. SP2753 and SP2757 are multiplied by these SP values.
Plain: High speed, 1200: Low speed
The paper trailing edge area can be adjusted with SP2774.
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 400 / 100 / 5%/step]
002 Paper Transfer: Plain: 2nd Side *ENG
003 Paper Transfer: 1200: 1st Side *ENG
005 Separation DC: Plain: 1st Side *ENG
006 Separation DC: Plain: 2nd Side *ENG
007 Separation DC: 1200: 1st Side *ENG
To Next Page
Loading...
