Main SP Tables-2
D086/D087 5-116 SM
2824
[Special 2: Switch Timing: Trail. Edge]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
plate at the paper trailing edge between the erase margin area and the image
area.
Plain: High speed, 1200: Low speed
001 Paper Transfer: Plain: 1st Side *ENG
[0 to 50 / 0 / 2 mm/step]
002 Paper Transfer: Plain: 2nd Side *ENG
003 Paper Transfer: 1200: 1st Side *ENG
005 Separation DC: Plain: 1st Side *ENG
006 Separation DC: Plain: 2nd Side *ENG
007 Separation DC: 1200: 1st Side *ENG
2830
[Special 2: Environment Correction]
Plain: High speed, 1200: Low speed
001 Paper Transfer: Plain: 1st Side *ENG
[1 to 60 / 26 / 1 /step]
002 Paper Transfer: Plain: 2nd Side *ENG
[1 to 60 / 32 / 1 /step]
003 Paper Transfer: Plain: BW: 1st Side *ENG
[1 to 60 / 1 / 1 /step]
004 Paper Transfer: Plain: BW:2nd Side *ENG
[1 to 60 / 11 / 1 /step]
005 Paper Transfer: Plain: FC: 1st Side *ENG
[1 to 60 / 1 / 1 /step]
006 Paper Transfer: Plain: FC:2nd Side *ENG
[1 to 60 / 14 / 1 /step]
007 Paper Transfer: 1200: 1st Side *ENG
[1 to 60 / 26 / 1 /step]
009 Paper Transfer: 1200: BW: 1st Side *ENG
[1 to 60 / 11 / 1 /step]
011 Paper Transfer: 1200: FC: 1st Side *ENG
[1 to 60 / 1 / 1 /step]
To Next Page
Loading...
