Ricoh Aficio MP C3501

System SP1-xxx
SM Appendix 3-7 D086/D087
Appendix:
SP Mode
Tables
1102
[Feed Permit Setting]
Specified the settings of the paper feeding timing.
001
Temp.:Lower
Delta:Center
*ENG
[0 to 200 / 15 / 1 deg/step]
Specifies the subtractive temperature of the heating roller (center) for the paper
feed permission.
002
Temp.:Lower Delta:End *ENG
[0 to 200 / 100 / 1 deg/step]
Specifies the subtractive temperature of the heating roller (end) for the paper
feed permission.
003
Temp.:Upper
Delta:Center
*ENG
[0 to 200 / 100 / 1 deg/step]
Specifies the additional temperature of the heating roller (center) for the paper
feed permission.
004
Temp.:Upper Delta:End *ENG
[0 to 200 / 100 / 1 deg/step]
Specifies the additional temperature of the heating roller (end) for the paper
feed permission.
005
Temp.:Lower Delta:Press *ENG
[0 to 200 / 100 / 1 deg/step]
Specifies the subtractive temperature of the pressure roller for the paper feed
permission.
006
Rotation Time *ENG
[0 to 100 / 0 / 1 sec/step]
Specifies the threshold time of the pre-rotation for the paper feed permission.
007
Temp.:Lower
Delta:Center:Sp.1
*ENG
[0 to 200 / 5 / 1 deg/step]
008
Temp.:Lower
Delta:End:Sp.1
*ENG
[0 to 200 / 100 / 1 deg/step]
009
Temp.:Upper
Delta:Center:Sp.1
*ENG
[0 to 200 / 100 / 1 deg/step]
010 Temp.:Upper *ENG
[0 to 200 / 100 / 1 deg/step]