Safran CORTEX Series - DMX Table; TCP;IP Data Transmission; TCP;IP Playback Data Reception

HIGH DATA RATE RECEIVER
HDR-4G+ USER’S MANUAL
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
© Safran Data Systems – IMP000074 e14r1
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Page 210
DMX table: 4.2.9.5.3
Registry path: HKEY_LOCAL_MACHINE/SOFTWARE/In-Snec/CrtxHdr/SetDefault/Signal
Processing /Global
Keywords: DisableDmxAllTable
1: disable the DMX table from the All Components table (refer to the document STI 100013 HDR)
0: enable the DMX table inside the All Components table
Default setting: 0 for a new software installation
Default setting: 1 for a software upgrade installation
TCP/IP data transmission: 4.2.9.5.4
Registry path: HKEY_LOCAL_MACHINE/SOFTWARE/In-Snec/CrtxHdr/SetDefault/Signal
Processing /Global
Keyword: TimeoutTcp
Delay (in second) before transmitting of an uncompleted Telemetry Data Message over TCP/IP
Default setting: 0
TCP/IP Playback data reception 4.2.9.5.5
Registry path: HKEY_LOCAL_MACHINE/SOFTWARE/In-Snec/CrtxHdr/SetDefault/Signal
Processing /Global
Keyword: TimeoutPbk
Delay (in milliseconds) before disconnecting the user from Playback port (PBK-1 or PBK-2), stopping
the playback LAN session and flushing all remaining data; if user is no longer sending data to Playback
port.
Default setting: 5000