Safran CORTEX Series - Recording Global Window; Control; Figure 141: DRU: Recording Global Window

HIGH DATA RATE RECEIVER
HDR-4G+ USER’S MANUAL
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
© Safran Data Systems – IMP000074 e14r1
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Page 312
“Recording Global” Window 4.5.7.2
Figure 141: DRU: Recording Global Window
Control 4.5.7.2.1
Unless otherwise specified, parameters in this window are described in DRU.
START TIME
Storage start time: Day-Hour:Minute:Second
STOP TIME
Storage stop time: Day-Hour:Minute:Second
TM BLOCK PER FILE
Maximum number of TM blocks per recorded File (defines the recorded files
maximum size). If set to 0, the recorded files maximum size will be 2 Gbytes.
If checkbox “Max” is checked, file maximum size is almost infinite, and one
TM file is recorded for the recording session.
Start writing data to the disk.
Stop writing data.
Show recorded reports (see below).
To access to the erase functions by DRU (Refer to the paragraph “Global Disk
and Memory Management window).