Safran CORTEX Series - File Selection

HIGH DATA RATE RECEIVER
HDR-4G+ USER’S MANUAL
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
© Safran Data Systems – IMP000074 e14r1
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Page 353
File Selection 4.5.9.2.2
With “Report TM” mode:
CHANNEL
Selection of the Recording channel (DRU-A, B, C, …H) where the pass report file
has to be selected.
 DRU-A to DRU-H
REPORT NUMBER
Selection of the report number: 1 to N. Can be selected directly by clinking in the
Storage report and TM files Window
LINE
Selection of a specific line (a specific file) inside the selected pass report: 0 to N.
Can be selected directly by clinking in the Storage report and TM files Window
Allows to open the Storage report and TM files Window: