Safran CORTEX Series - Optional Rejection Filter; Monitoring; Upper Banner

HIGH DATA RATE RECEIVER
HDR-4G+ USER’S MANUAL
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
© Safran Data Systems – IMP000074 e14r1
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Page 266
Optional rejection Filter 4.5.4.1.1.4
LPF
Select additional Low Pass Filter +/- 128 MHz bandwidth
HBF
Select additional rejection filter
Monitoring 4.5.4.1.2
Status and alarms in this window are described in DMU.
Upper Banner 4.5.4.1.2.1
PLL
Demodulator global status:
 Locked green
 Unlocked red
BIT SYNC
Bit Synchronizer status:
 Locked green
 Unlocked red
BIT SYNC Q
Bit Synchronizer status for Q Channel (for UQPSK configuration):
 Locked green
 Unlocked red
VITERBI DECODER
Viterbi decoder status for I & Q Channels (logical AND of the VITERBI DECODER
I and VITERBI DECODER Q status in case of dual Viterbi configuration):
 Locked
 Unlocked
TCM DECODER
TCM decoder status (for 4D-8PSK-TCM configuration):
 Locked
 Unlocked
FUNCTIONS
One or more parameter values do not match the installed licenses, or firmware
capabilities:
 Functions (green): OK Move the cursor to the status field to see the lists
of available capabilities
 Warning (red): the requested configuration is not supported. Move the
cursor to the status field to check which parameter is incorrect (Tool Tip).