EasyManua.ls Logo

Safran CORTEX Series - SYMBOLS DESCRIPTION

Safran CORTEX Series
382 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HIGH DATA RATE RECEIVER
HDR-4G+ USER’S MANUAL
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
© Safran Data Systems IMP000074 e14r1
Page 22
SYMBOLS DESCRIPTION
The following symbols appear in this document and on the chassis:
ISO 7000-0434A
(2004-01)
Caution: The exclamation point within an equilateral triangle
is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
ISO 7000-0434B
(2004-01)
IEC 60417-6042
(2010-11)
Caution, risk of electric shock: The lightning flash with an
arrowhead symbol within an equilateral triangle, is intended
to alert the user to the presence of uninsulated ‘dangerous
voltage’ within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to
persons.
IEC 60417-5019
(2006-08)
Protective earth; protective ground: terminal is intended
for connection to an external conductor for protection
against electric shock in case of a fault.
IEC 60417-5007
(2009-02)
"ON" (power): indicate connection to the mains.
IEC 60417-5008
(2009-02)
"OFF" (power): indicate disconnection from the mains.
IEC 60417-5032
(2002-10)
Alternating current: the equipment is suitable for
alternating current only.
IEC 60417-6172
(2012-09)
Disconnection, all power plugs: The equipement has
multiple power source. All power sources shall be
disconnected before servicing to avoid shock hazard.
Altitude: Do not use at an altitude exceeding 2000m.
Tropical conditions: This product is not suitable for tropical
conditions.
Documentation must be consulted in all cases where this symbol is marked.

Table of Contents

Related product manuals