Safran CORTEX Series - Monitoring; Session Status; Upper Banner

HIGH DATA RATE RECEIVER
HDR-4G+ USER’S MANUAL
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
© Safran Data Systems – IMP000074 e14r1
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Page 318
SORT B
Enable or disable the insertion of the Sort B marker in the recorded files
names
SORT C
Enable or disable the insertion of the Sort C marker in the recorded files
names
SPECIFIC PROJECT
P1, P2, P3, and P4, hexadecimal values from 0 to FFFFFFFF. Theses
parameters are specific to the project.
PARAMETERS
Specific user defined markers. For A, B and C, the corresponding fields
allow to enable or disable the insertion of the marker and to enter the
characters string of the marker (up to 12 characters for each field)
EXTENSIONS
Allows for the recorded Data files and the session Report files to define an
extension suffix which will be inserted in the files names
Note: the characters strings markers of the filtering, sorting and extract operation are defined in
their corresponding configuration files.
Monitoring 4.5.7.3.2
Status & alarms in this window are described in DPU.
Session Status 4.5.7.3.2.1
DIR. NBR.
Number of created directories (up to 64)
NUMBER
Directories indexes (DIR00 to DIR63). DIR00 corresponds to the first
directory where sorted TM files are recorded, DR01 to the second directory
and so on..
TOTAL TM BLOCK
Total number of TM Blocks for all directories (All line) and for each
directory.(DR00 to DR63 lines)
BAD TM BLOCK
Total number of bad TM Blocks for all directories and for each directory
SORT TM FILE
Total number of Sort TM files created for all directories and for each
directory
SORT VALUE
First four bytes of the last frame data which created the corresponding last
sorting.
Upper Banner 4.5.7.3.2.2
See section 4.5.4.1.2.1 .
Detailed information for the set-up and operation of the functionality is given in the Recording
and FTP Recovery User Manual DTU 10038.