Safran CORTEX Series - Software Version; Figure 6: MCS Software Version

HIGH DATA RATE RECEIVER
HDR-4G+ USER’S MANUAL
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
© Safran Data Systems – IMP000074 e14r1
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Page 40
Software Version 1.4.4.3
The software version at delivery is described in Annex 5 and, in more details, in the CORTEX HDR
Acceptance Test Report (document reference: CRE101551).
 PROMed software (Demodulator and Test Modulator boards): see the factory acceptance test
results (CRE101551).
 Disk resident software (SPS & MCS):
 Signal Processing Software (FPGA software downloaded to the Demodulator board and
Modulator board at boot-up): open the CONFIG window (see Section 4.5.3.4 for more
details).
 Signal Processing Software (Windows software): click on at the bottom of the
screen. Then select About Cortex... to display the software version.
 Monitoring & Control Software: click on or on Help in the top-level window, then
select About CrtxMcs...:
Figure 6: MCS Software Version