Safran CORTEX Series - 5.4 SOFTWARE UPGRADE & INSTALLATION

HIGH DATA RATE RECEIVER
HDR-4G+ USER’S MANUAL
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
© Safran Data Systems – IMP000074 e14r1
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Page 368
Software Upgrade & Installation 5.4
The CORTEX HDR software is supplied in the form of DVD:
 Windows OS for re-installing the operating system in the case of disk failure.
 HDR software. The CD ROM contains the Signal Processing Software (SPS), Monitoring &
Control Software (MCS), Demodulator board software (disk-resident part only) and the user
documentation.
Loading or Upgrading the IN-SNEC Software 5.4.1
Strictly follow the procedure described on the back of the reference CD ROM.
Complete Software Re-installation
5.4.2
In the case of disk failure, complete software re-installation will be required:
1. Load Windows Operating System (procedure described at the back of the CD ROM).
2. Load the HDR software (procedure described on the back of the CD ROM).