Safran CORTEX Series - CORTEX HDR Software; Local or Remote M&C; Password Protection

HIGH DATA RATE RECEIVER
HDR-4G+ USER’S MANUAL
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
© Safran Data Systems – IMP000074 e14r1
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Page 39
CORTEX HDR Software 1.4.4
The CORTEX HDR is supplied with two separate software packages:
 Signal Processing Software package (SPS)
 Monitoring & Control Software package (MCS)
These software are executed under the control of the Operating System. Software configuration at
delivery is described in Annex 5.
Local or Remote M&C 1.4.4.1
The Signal Processing Software and Monitoring & Control Software communicate by means of
connected sockets under TCP-IP protocol. As a result, the notion of local or remote M&C no longer
applies to the CORTEX HDR: since the MCS software package can be installed (free copyright) into
any PC-based computer(s), there is no difference between operating the equipment locally (front panel
keyboard and screen) or remotely, provided that the CORTEX HDR and the PC-based computer(s) are
connected to the same Ethernet network.
Password Protection 1.4.4.2
The following functions are password-protected:
 Cortex user login ;
 CORTEX HDR configuration;
 Reset of TCP-IP connections.
Default setting at delivery: cortex (login function). Other functions: no password.