Safran CORTEX Series - AIT Connector (LVDS Data Output - J73) Description; Table 6: Data and Clock Outputs on J73

HIGH DATA RATE RECEIVER
HDR-4G+ USER’S MANUAL
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
© Safran Data Systems – IMP000074 e14r1
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Page 70
AIT Connector (LVDS Data Output - J73) description 2.2.2.2.2
This connector can be used to output data from demodulator A (single channel) in Split 8 and Split 16
modes.
The electrical format is standard LVDS.
PINS
SPLIT 8 MODE
SPLIT 16 MODE
6/8
Clock @ BR/8 +/-
Clock @ BR/16 +/-
2/4
Data I 1
Data I 1
14/16
Data Q 1
Data Q 1
10/12
Data I 2
Data I 2
22/24
Data Q 2
Data Q 2
18/20
Data I 3
Data I 3
30/32
Data Q 3
Data Q 3
26/28
Data I 4
Data I 4
38/40
Data Q 4
Data Q 4
34/36
Reserved
Data I 5
46/48
Reserved
Data Q 5
42/44
Reserved
Data I 6
54/56
Reserved
Data Q 6
50/52
Reserved
Data I 7
62/64
Reserved
Data Q 7
58/60
Reserved
Data I 8
70/72
Reserved
Data Q 8
66/68
Reserved
Reserved
Table 6: Data and Clock outputs on J73