Safran CORTEX Series - Auto Connect Time-Out; Auto Connect Retry; MCS Preferences; Synchronization Word: Bit Masking Convention

HIGH DATA RATE RECEIVER
HDR-4G+ USER’S MANUAL
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
© Safran Data Systems – IMP000074 e14r1
This document is the property of Safran Data Systems.
It cannot be duplicated or distributed without expressed written consent.
Page 228
Auto Connect Time-out 4.3.12.2.2
Registry path: HKEY_LOCAL_MACHINE / SOFTWARE\In-Snec\CrtxMcs\Tcp
Keyword: AutoReconnect (time interval between retry to connect)
Setting: Any integer value  1. Default: 5000. Expressed in ms
Auto Connect Retry 4.3.12.2.3
Registry path: HKEY_LOCAL_MACHINE / SOFTWARE\In-Snec\CrtxMcs\Tcp
Keyword: NbRetryAutoReconnect (maximum number of retry to connect)
Setting: Any integer value  1. Default: 3
MCS Preferences 4.3.12.3
Synchronization Word: Bit Masking Convention 4.3.12.3.1
Synchronization Word bit masking convention for frame synchronization.
Registry path: HKEY_LOCAL_MACHINE/SOFTWARE/In-Snec/CrtxMcs/Product/Product4
/Preferences
Keyword: SW Mask
Enter 0 (ignore SW bits corresponding to bits set to 1 in the mask) or 1 (ignore SW bits corresponding
to bits set to 0 in the mask).
Default setting: 0.