Machining the workpiece
4.11 Display and edit user variables
Turning
156 Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Press the <INPUT> key.
- OR -
Press the <Cursor right> key.
The selected file is opened in the editor and can be edited there.
6. Define the desired user variable.
7. Press the "Exit" softkey to close the editor.
Activating user variables
1. Press the "Activate" softkey.
A prompt is displayed.
2. Select whether the current values in the definition files should be
retained
- OR -
Select whether the current values in the definition files should be
deleted.
This will overwrite the definition files with the initial values.
3. Press the "OK" softkey to continue the process.
To Next Page
Loading...
