Alarm, error and system messages
13.7 Logbook
Turning
700 Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
13.7.2 Making a logbook entry
Using the "New logbook entry" window to make a new entry into the logbook.
Enter your name, company and department and a brief description of the measure taken or a
description of the fault.
Note
If you wish to make line breaks in the "fault diagnostics/measure" field, use the key
combination <ALT> + <INPUT>.
The date and entry number are automatically added.
Sorting the entries
The logbook entries are displayed numbered in the "machine logbook" window.
More recent entries are always added at the top in the display.
Procedure
1. The logbook is opened.
2. Press the "New entry" softkey.
The "New logbook entry" window opens.
3. Enter the required data and press the "OK" softkey.
You return to the "Machine logbook" window and the entry is displayed
below the machine identity data.
Note
Deleting logbook entries
Up to the end of the 2nd commissioning, you have the option to delete the logbook entries
up to the time of the first commissioning using the "Clean up" softkey.
To Next Page
Loading...
