Alarm, error and system messages
13.7 Logbook
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
701
Searching for a logbook entry
You have the option for searching for specific entries using the search function.
1. The "Machine logbook" window is opened.
2. Press the "Search..." softkey and enter the desired term in the search
form. You can make a search according to date/time, company
name/department or according to fault diagnostics/measure.
The cursor is positioned on the first entry that corresponds to the search
term.
3. Press the "Continue search" softkey if the entry found is not the one that
you are looking for.
Additional search option
Press the "Go to Beginning" softkey to start the search at the latest
entry.
Press the "Go to End" softkey to start the search at the oldest entry.
To Next Page
Loading...
