Working with Manual Machine
14.5 Simple workpiece machining
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
713
Parameter Description Unit
T Tool name
D Cutting edge number
F
Feedrate mm/min
mm/rev
S / V
Spindle speed or constant cutting rate rev/min
m/min
α1 Rotation of the coordinate system. Degrees
Other M function Input of machine functions
Refer to the machine manufacturer's table for the correlation between the meaning
and number of the function.
14.5.3 Straight and circular machining
14.5.3.1 Straight turning
Use this function for simple, straight machining (e.g. face or longitudinal turning).
Procedure
1. "Manual Machine" is active.
2. Press the "Straight circle" softkey.
3. Select the desired straight machining and press the "All axes" softkey
- OR -
Press the softkey "Straight X α"
- OR -
Press the softkey "Straight Z α"
4. Specify the desired value for the feedrate F.
- OR -
Press the "Rapid traverse" softkey.
The rapid traverse is displayed in field "F".
5. Enter the target position and, if required, the angle (α) for the axis or
axes to be traversed.
To Next Page
Loading...
