Managing programs
12.1 Overview
Turning
638 Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
12.1.2 NC memory
The complete NC working memory is displayed along with all tools and the main programs
and subroutines.
You can create further subdirectories here.
Proceed as follows
1. Select the "Program manager" operating area.
2. Press the "NC" softkey.
12.1.3 Local drive
Workpieces, main and subprograms that are saved in the user memory of the CF card or on
the local hard disk are displayed.
For archiving, you have the option of mapping the structure of the NC memory system or to
create a separate archiving system.
You can create any number of subdirectories here, in which you can store any files (e.g. text
files with notes).
Software options
To display the "Local drive" softkey, you require the "Additional HMI user
memory on CF card of the NCU" option (not for SINUMERIK Operate on
PCU50 or PC/PG).
Procedure
1. Select the "Program manager" operating area.
2. Press the "Local drive" softkey.
On the local drive, you have the option of mapping the directory structure of the NC memory.
This also simplifies the search sequence.
To Next Page
Loading...
Need help?
General
