Siemens SINUMERIK 828D Turning - Read in Archive from System Data

Managing programs
12.15 Backing up data
Turning
674 Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
12.15.4 Read in archive from system data
If you want to read in a specific archive, you can select this directly from the data tree.
Procedure
1. Select the "Start-up" operating area.
2. Press the "System data" softkey.
3. In the data tree below the "Archive" directory, in the "User" folder,
select the file that you wish to read in.
4. Press the "Read in" softkey.
...
5. Press the "OK" or "Overwrite all" softkey to overwrite existing files.
- OR -
Press the "Do not overwrite" softkey if you do not want to
overwrite already existing files.
- OR -
Press the "Skip" softkey if the read-in operation is to be continued
with the next file.
The "Read In Archive" window opens and a progress message
box appears for the read-in process.
You will then obtain a "Read error log for archive" in which the
skipped or overwritten files are listed.
6. Press the "Cancel" softkey to cancel the read-in process.