Easy Extend (828D only)
21.2 Enabling a device
Turning
778 Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
21.2 Enabling a device
The available device options are protected by a password.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Procedure
1. Select the "Parameter" operating area.
2. Press the menu forward key and then the "Easy Extend" softkey.
A list of the connected devices is displayed.
3. Press the "Enable function" softkey.
The "Enabling of the Devices Option" window is opened.
4. Enter the option code and press the "OK" softkey.
A tick appears in the appropriate checkbox in the "Function" column
and the function is enabled.
To Next Page
Loading...
Need help?
General
