Ladder Viewer and Ladder add-on (828D only)
23.7 Displaying and editing NC/PLC variables
Turning
792 Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
23.7 Displaying and editing NC/PLC variables
The "NC/PLC Variables" window enables the monitoring and modification of NC system
variables and PLC variables.
You receive the following list in which you enter the desired NC and PLC variables in order
to display the actual values.
● Variable
Address for NC/PLC variable.
Faulty variables have a red background and # is displayed in the Value column.
● Comment
Arbitrary comment on the variables.
The column can be shown or hidden.
● Format
Specification of the format in which the variable is to be displayed.
The format can be permanently defined (e.g. floating-point).
● Value
Display of the current value of the NC/PLC variable.
Procedure
1. Ladder add-on tool is opened.
2. Press the "NC/PLC variables" softkey.
The "NC/PLC Variables" window appears.
To Next Page
Loading...
