Managing programs
12.12 Set up drives
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
663
Entry Meaning
Access level Assign access rights to the connections: From access
level 7 (keyswitch position 0) to access level 1
(manufacturer).
The particular assigned access level applies to all
operating areas.
Softkey text 2 lines are available as labeling text for the softkey. %n is
accepted as a line separator.
If the first line is too long, then it is automatically
separated into several lines.
If a blank is present, then this is used as line separator.
Softkey icon No icon No icon is displayed on the softkey.
sk_usb_front.png
sk_local_drive.png
sk_network_drive_ftp.p
ng
The icon file name displayed on the softkey.
Text file slpmdialog
Text context SlPmDialog
File for softkey dependent on the language. If nothing is
specified in the input fields, the text appears on the
softkey as was specified in the input field "Softkey text".
If your own text files are saved, then the text ID, which is
used to search for the text file, is specified in the "Softkey
text" input field.
User name
Password
Enter the user name and the corresponding password for
which the directory is enabled on the server. The
password is displayed in encoded form as string of "*"
characters and is stored in the "logdrive.ini" file.
Error messages
Error message Meaning
Error occurred when closing a connection. An existing drive was not able to be deactivated.
Error occurred when establishing a connection. Drive connection was not able to be established.
Error occurred while establishing a connection:
Incorrect entry or no authorization.
Drive connection was not able to be established.
Incorrect data The entered data is either incorrect or
inconsistent.
Function not available The function is not supported with the current
software release.
Unknown error - error code:%1 Error was not able to be assigned.