Machining the workpiece
4.12 Displaying G functions and auxiliary functions
Turning
164 Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
3. Press the menu forward key and the "Synchron." softkey.
The "Synchronized Actions" window appears.
You obtain a display of all activated synchronized actions.
4. Press the "ID" softkey if you wish to hide the modal synchronized
actions in the automatic mode.
- AND / OR -
Press the "IDS" softkey if you wish to hide static synchronized actions.
- AND / OR -
Press the "Blockwise" softkey if you wish to hide the non-modal
synchronized actions in the automatic mode.
...
5. Press the "ID", "IDS" or "Blockwise" softkeys to re-display the
corresponding synchronized actions.
To Next Page
Loading...
