Siemens SINUMERIK 828D Turning - Page 251

Creating a ShopTurn program
7.14 Selection of the cycles via softkey
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
251
⇒
⇒ ⇒
⇒
⇒
⇒
⇒
⇒ A menu tree with all of the available measuring versions of the measuring
cycle function "Measure workpiece" can be found in the following
reference:
Programming Manual Measuring cycles / SINUMERIK 840D sl/828D
⇒ A menu tree with all of the available measuring versions of the measuring
cycle function "Measure tool" can be found in the following reference:
Programming Manual Measuring cycles / SINUMERIK 840D sl/828D