Working with Manual Machine
14.5 Simple workpiece machining
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
715
Parameters
Parameter Description Unit
F
Feedrate mm/min
mm/rev
Circle input
• End point + center point
• End point + radius
Direction of rotation
Clockwise direction of rotation
Counter-clockwise direction of rotation
X
Target position in the X direction (abs and inc) mm
Z
Target position in the Z direction (abs and inc) mm
I Circle center point I (inc) - only if circle input via end point and center point mm
K Circle center point K (inc) - only if circle input via end point and center point
Note:
Incremental dimensions: The sign is also evaluated.
mm
R Radius - only if circle input via end point and radius mm
To Next Page
Loading...
