Siemens SINUMERIK 828D - Page 340

Programming technology functions (cycles)
9.1 Drilling
Turning
340 Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Parameter
Description
Unit
Y0
Z0
C0
Y1
... Y5
Z1
... Z5
C1 ...C5
(only for G code)
Axes YZC (for G19)
Y coordinate of 1st position (abs)
Z coordinate of 1st position (abs)
C coordinate of 1st position
Y coordinates of additional positions (abs or inc)
Z coordinates for additional positions (abs or inc)
C coordinates for additional positions (abs or inc)
mm
mm
Degrees
mm
mm
Degrees
Z0
CP
X0
Y0
X1
... X7
Y1
... Y7
(only for ShopTurn)
Face C and face Y - at right angles
Z coordinate of the reference point (abs)
Positioning angle for machining area (only for face Y)
X coordinate of 1st position (abs)
Y coordinate of 1st position (abs)
X coordinate for additional positions (abs or inc)
Incremental dimension: The sign is also evaluated
Y coordinate for additional positions (abs or inc)
Incremental dimension: The sign is also evaluated
mm
Degrees
mm
mm
mm
mm
Z0
CP
C0
L0
C1
... C7
L1
... L7 (only for ShopTurn)
Face C and face Y - polar (ShopTurn:
Z coordinate of the reference point (abs)
Positioning angle for machining area (only for face Y)
C coordinate of 1st position (abs)
1st position of hole with reference to Y axis (abs)
C coordinate for additional positions (abs or inc)
Incremental dimension: The sign is also evaluated
Distance to position (abs or inc)
Incremental dimension: The sign is also evaluated
mm
Degrees
Degrees
mm
Degrees
mm
X0
Y0
Z0
Y1
...Y7
Z1
...Z7 (only for ShopTurn)
Peripheral surface C - at right angles
Cylinder diameter ∅ (abs)
Y coordinate of 1st position (abs)
Z coordinate of 1st position (abs)
Y coordinate for additional positions (abs or inc)
Incremental dimension: The sign is also evaluated
Z coordinate for additional positions (abs or inc)
Incremental dimension: The sign is also evaluated
mm
mm
mm
mm
mm
C0
Z0
C1
...C7
Z1
... Z7 (only for ShopTurn)
Peripheral surface C - cylindrical
C coordinate of 1st position (abs)
1st position of hole with reference to Z axis (abs)
C coordinate for additional positions (abs or inc)
Incremental dimension: The sign is also evaluated
Additional positions in the Z axis (abs or inc)
Incremental dimension: The sign is also evaluated
Degrees
mm
Degrees
mm