Siemens SINUMERIK 828D - Page 664

Multi-channel machining
10.2 Multi-channel support
Turning
664 Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
Parameters
Description
Unit
Work offset
Work offset in which the coordinate system, which was shifted according to ZW
and by ZV as well as mirrored in Z, must be saved:
• Basic reference
• G54
• G55
• G56
• G57
• ...
Work offset
write to
• Yes
The Z value of the work offset can be directly written to the input screen
form.
• No
The actual Z value of the work offset is used.
ZV - only for
work offset
write "yes"
• Offset Z = 0
• Workpiece zero is offset in Z direction (inc, the sign is also evaluated)
Park counter-spindle Traverse counter-spindle to park position - for "main spindle" selection
• Yes
• No
Z4P - for park counter-
spindle "yes"
Park position of the counter-spindle (abs); MCS mm
Z4W
Machining position of the counter-spindle (abs); MCS
mm