Siemens SINUMERIK 828D - Page 764

Managing programs
13.12 Set up drives
Turning
764 Operating Manual, 01/2015, 6FC5398-8CP40-5BA2
A window with the appropriate message opens if the data is inco
mplete
or incorrect. Acknowledge the message with softkey "OK".
If you press the "Cancel" softkey, then all of the data that has not been
activated is rejected.
9.
Restart the control in order to activate the configuration and to o
b
tain the
softkeys in the "Program Manager" operating area.
Entering the default settings for drive release
Note
This function is available only on Windows systems when the "Execution from External
Storage (EES)" software option is activated.
1.
Select the "Start
-up" operating area.
2.
Press the "HMI"
and "Log. drive" softkeys.
The "Set Up Drives" window opens.
3.
Press the "Glob. settings
" softkey.
4.
Enter the user name and the associated password for the confi
gured
drives to be released.
5.
Press the "OK" softkey.
The specifications are transferred as default setting for the Windows
release.
If you press the "Cancel" softkey, then all of the data that has not been
activated is rejected.