Sony MVS-8000X SystemMVS-7000X System - Page 343

USO RESTRITO
Applying Special Effects (Lighting and Recursive Effects) 343
Knob
Parameter
Adjustment
Setting values
1
Luminance
Luminance
0.00 to 100.00
2
Saturation
Saturation
0.00 to 100.00
3
Speed
Speed at which
hue changes
–12.00 to
+12.00
a)
4
Brilliancy
Brilliance of
surface struck
by light
0.00 to 100.00
b)
Chapter
11
DME
Operations
a) –1.00 is one rotation in the counterclockwise direction and +1.00 is
one rotation in the clockwise direction.
Notes
There is no Radius setting when Line is selected in the
<Spot Mode> group.
To rotate the ring
1 Press [Ring Speed], turning it on.
The display on knob 3 that was visible when [Ring]
was selected changes.
2 Set the following parameter.
Knob
Parameter
Adjustment
Setting values
3
Speed
Rotation speed
and direction
–100.00 to
+100.00
a)
a) –100.00 is four rotations per second in the counterclockwise
direction, and +100.00 is four rotations per second in the clockwise
direction. 0.00 stops the rotation.
To invert the lighted area
Press [Light Invert], turning it on.
To add color to the light source
1 In the Light 1 menu, press [Light Color Adjust].
The Light Color Adjust menu appears.
2 In the <Fill Blending Mode> group, select how the
light and image should be blended.
Mix: Light as if reflected from a mirror.
Multiply: Light as if reflected from a dull surface
(diffuse reflection).
3 If you selected Mix, select the fill color in the <Fill
Source> group.
Flat Color: A monochrome matte.
Hue Rotation: Color matte with a color that gradually
varies.
4 According to the selection, set the following
parameters.
When you selected Flat Color
Knob
Parameter
Adjustment
Setting values
1
Luminance
Luminance
0.00 to 100.00
2
Saturation
Saturation
0.00 to 100.00
3
Hue
Hue
359.99 to 0.00
4
Brilliancy
Brilliance of
surface struck
by light
0.00 to 100.00
a)
a) 100.00: The image beneath the light shines through.
When you selected Hue Rotation
a) –12.00 is a 360-degree rotation every second in the counterclockwise
direction. +12.00 is a 360-degree rotation every second in the
clockwise direction.
b) 100.00: The image beneath the light shines through.
Copying or swapping light source settings
You can copy or swap the setting from one light source
(Light 1 to Light 3) to another light source.
1 In the Spot Lighting menu, press [Copy/Swap].
The Copy/Swap menu appears.
Two lists appear in the status area. The list on the left
shows the copy or swap sources, and the list on the
right shows the copy or swap destinations.
2 Do one of the following to select the target data.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video
cursor.
• Turn the knobs.
Knob
Parameter
Adjustment
Setting values
1
Left No
Copy or swap
source data
1 to 3
2
Right No
Copy or swap
destination data
1 to 3
3 Press [Copy] to copy, or [Swap] to swap.
To undo a copy or swap
Press [Undo]. Settings are returned to their values before
the copy or swap.