Sony MVS-8000X SystemMVS-7000X System - Page 616

USO RESTRITO
616
Signal Input Settings (Input Menu)
Knob
Parameter
Adjustment
Setting
format
Setting
values
2
LB
Position
Image
position
1080i/
59.94,
1080PsF
/29.97
–31 to +32
1080i/
50,
1080PsF
/25
–36 to + 36
720P/
59.94,
720P/50
–30 to +30
Chapter
20
Switcher
Setup
(Switcher)
To return the letterbox image to the center
In the <Letter Box Position> group, press [Center].
Making enhancer settings
1 In the Switcher >Input >FC Adjust menu, press
[Enhancer], turning it on.
2 Set the following parameters.
Making detailed settings for down-
conversion
1 In the Switcher >Input >FC Adjust menu, select the
input to which the setting applies.
2 In the <Aspect> group, select one of the following.
Edge Crop: Crop the left and right sides of a 16:9
image to convert it to a 4:3 image.
Letter Box 13:9: Crop the left and right sides of a 16:9
image to make a 13:9 image and add black bars at
the top and bottom of the 13:9 image to make a 4:3
image.
Letter Box 14:9: Crop the left and right sides of a 16:9
image to make a 14:9 image and add black bars on
the top and bottom of the 14:9 image to make a 4:3
image.
Letter Box 16:9: Add black bars on the top and
bottom of a 16:9 image to convert it to a 4:3 image.
Squeeze: Compress a 16:9 image horizontally to
convert it to a 4:3 image.
For details of the image transformations, see the
following figure.
Parameter group [1/2]
Knob
Parameter
Adjustment
Setting values
2
Detail Gain
Adjust the edge
enhancement
sharpness
0 to 127
3
Limiter
Adjust the
maximum signal
level to be added
to the original
signal
0 to 63
4
Crisp
Set the
amplitude value
for which a low-
amplitude signal
is not
emphasized
0 to 15
5
Level
Depend
Set the
luminance range
for edge
enhancement
0 to 15
Parameter group [2/2]
Knob
Parameter
Adjustment
Setting values
2
Frequency
Set the central
frequency for
edge
enhancement
0 to 3
3
H/V Ratio
Set the
horizontal/
vertical ratio for
edge
enhancement
0 to 7