Sony MVS-8000X SystemMVS-7000X System - Page 689

USO RESTRITO
Error Messages 689
Appendix
(Volume
2)
Icon
Message
Description
The file was not able to be read.
7142.1: File >Shotbox, Macro >File Edit
When [Off Line Edit] was pressed, the selected file could not be read.
Select the file again, and press [Off Line Edit] once more.
It was not possible to make a file.
7142.3: File >Shotbox, Macro >File Edit >Off Line Edit
The file could not be written when storing.
Try to store once more.
Failed...
7162: File >All, External File >Import/Export
Importing a file failed. Check the format of the original file, and try again.
The Source and the target are the
same directory.
Please change the source or the
target directory.
7172: File >Configure >Unit ID Copy
The same directory and ID were selected for source and target.
Select different directories and IDs.
Extraction
FM file auto extraction is running (–9).
2542: Frame Memory >File >Auto Extraction
When [Extraction Start] was pressed, a CG wipe extraction function was
already in progress.
FM 1394 HDD Backup or Restore is
processing. (–11).
2542: Frame Memory >File >Auto Extraction
When [Extraction Start] was pressed, a frame memory file data backup/
restore operation to/from the external hard disk was in progress.
FM DDR/VTR Backup/Restore is
running (–16).
2542: Frame Memory >File >Auto Extraction
When [Extraction Start] was pressed, a backup/restore operation using the
VTR/DDR was in progress.
ERROR (–1).
2542: Frame Memory >File >Auto Extraction
When [Extraction Start] was pressed, an internal processing error occurred.
Create thumbnail failed (–2).
2542: Frame Memory >File >Auto Extraction
When [Extraction Start] was pressed, thumbnail creation failed (internal
processing error).
Red Symbol file not match (–3).
2542: Frame Memory >File >Auto Extraction
When [Extraction Start] was pressed, a red marker frame file was invalid.
Blue Symbol file not match (–4).
2542: Frame Memory >File >Auto Extraction
When [Extraction Start] was pressed, a blue marker frame file was invalid.
No data between two symbol files (–
5).
2542: Frame Memory >File >Auto Extraction
When [Extraction Start] was pressed, there was no data between two
marker frames.
Cannot find symbol file (–8).
2542: Frame Memory >File >Auto Extraction
When [Extraction Start] was pressed, the marker frame file could not be
found.
Clip frame error (–10).
2542: Frame Memory >File >Auto Extraction
When [Extraction Start] was pressed, the number of frames in a clip was
invalid (internal processing error).
Clip not found (–12).
2542: Frame Memory >File >Auto Extraction
When [Extraction Start] was pressed, the specified clip did not exist.
Clip is playing or being edited (–13).
2542: Frame Memory >File >Auto Extraction
When [Extraction Start] was pressed, the specified clip was being played
back or edited.
Clip register error (–14).
2542: Frame Memory >File >Auto Extraction
When [Extraction Start] was pressed, the data in the specified register could
not be processed (internal processing error).
Can’t extract pair clip (–15).
2542: Frame Memory >File >Auto Extraction
When [Extraction Start] was pressed, an attempt was made to extract a pair
clip.
Clip id not enough (–50).
2542: Frame Memory >File >Auto Extraction
When [Extraction Start] was pressed, there were over 100 clips.
Still frame on FM 2nd board (–51).
2542: Frame Memory >File >Auto Extraction
When [Extraction Start] was pressed, a still image was extracted from an
external clip.