Cannot access the directory (–20).
2561: Frame Memory >External Device >Ext HDD Format
When [5 Partition] or [15 Partition] was pressed, the external hard disk
directory could not be accessed.
The external HDD is busy (–22).
2561: Frame Memory >External Device >Ext HDD Format
When [5 Partition] or [15 Partition] was pressed, the external hard disk was
in use and could not be accessed. Check that the access lamp of the hard
disk or the menu indicator is turned off, and try again.
Import
Cannot create the clip file, because
the number of selected files is
insufficient.
7162: File >All, External File >Import/Export
When importing a clip file, insufficient files were selected to create the clip.
Initial Read
When starting up the menu system, this popup message is displayed while
system information is being loaded.
Install
All processes have succeeded.
7316.10: Engineering Setup >System >Install/Unit Config >Install
The installation procedure was completed successfully.
An error occurred during the install
process.
For more details, see Page 9900.
7316.10: Engineering Setup >System >Install/Unit Config >Install
The menu software installation package does not match the model on which
it is to be installed.
Not Found.
The software package does not exist
on the removable disk.
7316.10: Engineering Setup >System >Install/Unit Config >Install
The software package to be installed could not be found. Check that the
memory card is correctly inserted, and try the installation once more.
No Task.
Select a package on the list.
7316.10: Engineering Setup >System >Install/Unit Config >Install
The package for installation was not selected. Select a package to be
installed.
Internal Error: Data HDD
The user data partition of hard disk
drive is damaged, and all data is lost.
The hard disk drive needs to be
reformatted.
Please execute HDD format on Page
7317.
When starting up the menu system, an error was found on the hard disk.
Execute [HDD Format] in menu 7317 (Engineering Setup >System
>Maintenance).
Internal Error: HDD is incorrect
Hard disk is incorrect or not formatted.
To format the hard disk, please
execute “HDD Format” on Page 7317.
When starting up the menu system, an error was found on the hard disk.
Execute [HDD Format] in menu 7317 (Engineering Setup >System
>Maintenance).
Internal Error: Recovery HDD
The recovery data partition of hard
disk is damaged, and all data is lost.
The data needs to be recovered.
Please execute Restore Data on Page
9999.
During menu startup, an error was found in the recovery data partition of the
hard disk.
Restore the recovery data using menu 9999.
a)
Internal Error: Temporary HDD
The system data partition of hard disk
drive is damaged. The hard disk drive
needs to be reformatted. Please
execute HDD format on Page 7317.
Please make sure to save all data in
the user data partition of hard disk
drive to any other device or media,
before reformatted.
When starting up the menu system, an error was found on the hard disk.
Execute [HDD Format] in menu 7317 (Engineering Setup >System
>Maintenance).
To Next Page
Loading...
