Invalid Name
2512: Frame Memory >Still >Freeze/Store
A Store operation was carried out without specifying a name.
71XX: File Menu
7171: File >Configure >Directory
When renaming a file or creating a directory, a name was not entered.
Specify the correct name.
The file exists already...
2512: Frame Memory >Still >Freeze/Store
The file name specified when [Store] was executed already exists in the
switcher. Specify a different name.
Loading Texture Pattern
Target File: XXXXX
Failed to load target bmp file./Illegal
Name.
This operation is canceled.
7316.9: Engineering Setup >System >Install/Unit Config >Texture Package
An error occurred when loading a texture file. Delete texture files with an
illegal size or illegal file name, then try again.
Target File: XXXXX
Failed to load target bmp file./Illegal
Size.
This operation is canceled.
Make Package
Texture file: XXXXX
Not Found.
This texture file does not exist on the
removable disk.
7316.9: Engineering Setup >System >Install/Unit Config >Texture Package
When loading an existing texture package, a texture file within the texture
package could not be found.
This operation is cancelled, because
capacity is full.
Please clear texture pattern.
7316.9: Engineering Setup >System >Install/Unit Config >Texture Package
When making a texture package using Make Package, there was insufficient
space on a memory card.
Password
7317.1: Engineering Setup >System >Maintenance >Setup Operation Lock
The wrong password was entered.
Enter the correct password.
Record
Cannot be executed.
Maximum number of clips are created.
2523: Frame Memory >Clip >Record
When [Rec Start] was executed, the number of recorded clips reached the
upper limit.
Recovery Complete
System disk has been damaged, and
then recovered.
Shutdown and restart the system is
recommended to exit from recovery
mode.
Corruption has been detected in the flash memory for starting the menu
CPU, but this has been recovered. Since the system is operating in recovery
mode, shut down and restart as soon as practicable.
a)
Refresh Status
No external HDD was found (–2).
2561: Frame Memory >External Device >Ext HDD Format
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Refresh Status] was pressed, the external hard disk could not be
found. Check that the external hard disk is correctly connected.
Cannot access the partition (–12).
2561: Frame Memory >External Device >Ext HDD Format
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Refresh Status] was pressed, the logical drives of the external hard
disk could not be accessed. Check that the external hard disk is correctly
formatted.
Cannot access the directory (–20).
2561: Frame Memory >External Device >Ext HDD Format
2562: Frame Memory >External Device >Ext HDD Backup/Restore
When [Refresh Status] was pressed, the directory of the external hard disk
could not be accessed.
Cannot access the directory (–21).