Yamaha F400A 2022 - Connecting the Fuel Hose

3-14
Rigging grommet mounting
d. Install the rigging grommet “1” along
with the grommet holder “2”.
e. Install the rigging tube retainer “1”, and
then fasten it using the plastic tie “2”.
Connecting the fuel hose
• When connecting the fuel hose, bleed the
boat fuel line.
See “Air purging during initial priming”
(3-81).
• The engine idle speed may be unstable after
the engine is started until the air is bled from
the high-pressure line, but this is not a mal-
function.
a
c
b
1
2
2
21
1
1
2