Bracket unit
2-20
PTT lead
PTT lead routing has been changed to run inside the clamp bracket, compared to the routing on the
outside of the clamp bracket in the previous models. The external appearance around the clamp
bracket has been refined further to provide additional product value.
PTT TotalTilt™
This outboard motor is equipped with an automatic PTT tilt function. When this function is activated,
you can tilt the outboard motor up/down automatically by pressing the switch twice quickly instead of
keeping the PTT switch pushed.
The PTT TotalTilt™ function is available only when the engine is stopped. To prevent danger, the PTT
buzzer (power unit part) sounds to warn to the surrounding when the PTT TotalTilt™ function is oper-
ating.
When tilting up, the outboard motor stops at the set limiter position.
This function is deactivated by default. It can be activated or deactivated by changing the setting.
The PTT switch can be used not only on the remote control lever side, but also on the bottom cowling
side.
To Next Page
Loading...
