Yamaha F400A 2022 - Removing the Shift Rod (Regular Rotation Model); Removing the Shift Rod (Counter Rotation Model); Removing the Gear Oil Passage Check Valve

Water pump and shift rod
8-12
Removing the shift rod (regular
rotation model)
1. Remove:
• Shift rod guide plate
•Plate
•Gasket
• Shift rod
a. Set the gear shift to the N position.
b. Remove the shift rod guide plate “1”,
plate “2”, gasket “3”, and shift rod “4”.
Removing the shift rod (counter
rotation model)
1. Remove:
• Shift rod guide plate
•Plate
•Gasket
• Shift rod
a. Set the gear shift to the N position.
b. Remove the shift rod guide plate “1”,
plate “2”, gasket “3”, and shift rod “4”.
Removing the gear oil passage check
valve
• Use heat-resistant gloves. Otherwise,
burns could result.
• To prevent fires, remove any flammable
substances, such as gasoline and oil,
around the working area.
• Keep good ventilation while working.
1. Remove:
• Gear oil passage check valve (lower case)
“1”
Shift rod socket “1”
90890-06950
R
N
F
1
90°
4
1
2
3
4
Shift rod socket “1”
90890-06950
R
N
F
1
90°
4
1
2
3
4