Predelivery check
10-22
Predelivery check
To make the delivery process smooth and efficient, complete the predelivery checks as explained in
the following procedures.
Item Procedures See
Engine oil level
Check the oil level using the dipstick.
Oil is not at the proper level → Add or extract engine oil.
10-10
Battery
Check the battery electrolyte level.
Below the minimum level mark → Add distilled water.
10-9
Check the specific gravity of the electrolyte.
Below specification → Fully charge the battery.
Cooling water pilot
hole
Start the engine. —
Check that the cooling water is discharged from the cooling wa-
ter pilot hole.
Not discharged → Check the cooling passage for clog.
10-9
2-53
Communication be-
tween the engine and
the Digital Electronic
Control
Check that the digital electronic control-active indicator light or
DEC alert indicator light comes on in blue.
Light does not come on in blue → Check the wire harness for
proper connections, the main wire harness (16 pins) for continui-
ty, and the Digital Electronic Control circuit.
3-25
5-50
Engine start switch
(Single application)
Check that the engine starts when the engine start switch is
turned to START.
Out of specification → Check the engine start switch.
5-41
5-43
Check that the engine stops when the engine start switch is
turned to OFF.
Out of specification → Check the engine start switch.
Main switch (or
“POWER” switch)
Engine start/stop
button
Turn the main switch (or “POWER” switch) to ON, and then push
the engine start/stop button. Check that the engine starts.
Out of specification → Check the main switch (or “POWER”
switch) or engine start/stop button.
5-41
5-41
5-42
5-43
Start the engine. Check that the engine stops when the main
switch (or “POWER” switch) is turned to OFF.
Out of specification → Check the main switch (or “POWER”
switch).
5-41
5-42
Start the engine. Check that the engine stops when the engine
start/stop button is pushed.
Out of specification → Check the engine start/stop button.
5-43
Engine shut-off
switch
Check that the engine stops when the clip is removed from the
engine shut-off switch.
Out of specification → Check the engine shut-off switch.
5-39
5-39
Fuel line
Check the fuel line connection.
Disconnect → Connect.
2-42
Check all the fuel lines for leakage.
Le
aking → Check the related parts.
Gear oil
Check the gear oil level.
Below the proper level → Add the recommended gear oil.
10-14
To Next Page
Loading...
