Yamaha F400A 2022 - Installing Y-COP

3-16
Optional equipment
TIP:
Make sure that there is no slack in the wire
harness.
g. Fasten the SCU communication lead
using the plastic ties “1”, “2”, and “3” at
the 4 locations shown in the illustration.
TIP:
• Make sure that the SCU communication
lead does not contact the oil filter.
• Make sure that there is no slack in the wire
harness.
Installing Y-COP
To install the Y-COP, see Helm Master Rig-
ging Guide (6X9-28197-1*).
1
2
3
1