Yamaha F400A 2022 - Page 549

General periodic maintenance
10-12
4. Remove:
• Apron (PORT) “1”
5. Drain:
•Engine oil
a. Remove the oil filler cap “1”.
b. Place a drain pan “1” under the engine
oil drain hole.
c. Remove the drain bolt “2”, O-ring “3”,
circlip “4”, and oil strainer “5” and let
the oil drain completely.
6. Check:
• Oil strainer
See “Checking the oil pan and oil strainer”
(9-29).
7. Install:
• Oil strainer “1”
• Circlip “2”
• O-ring “3”
• Drain bolt “4”
8. Fill:
• Recommended engine oil
a. Fill the engine with the specified
amount of the recommended engine oil
through the oil filler hole. Install the oil
filler cap.
Do not overfill the engine with engine oil.
Otherwise, the engine could be damaged
or oil could leak. If the engine oil is above
the upper level, extract the excess engine
oil until the oil is at the proper level.
2
44
3
1
5
5
1
1
T
R
.
.
Drain bolt
60 N·m (6.1 kgf·m, 44 lb·ft)
Engine oil quantity (without oil fil-
ter replacement)
7.5 L (7.93 US qt, 6.60 Imp.qt)
2
3
4
5
1
New
4
3
2
1
EE