Humphrey Field Analyzer II-
i
series User Manual 2660021145640 A
EasyConnect RCT 1.0
G-9
The RCT displays a message alerting you there will be a delay before proceeding (Figure G.8).
Figure G.8 Please Wait Message
Note: You must select at least one instrument to continue.
Note: The name of the HFA II-
i
instrument can be created on the instrument in the HFA Network
Setup Screen. Creating a name for an instrument can allow you to know the location of the
instrument. If you do not create a name, then the Name field in the instrument list will be empty
(see “Enable the RCT and Name HFA II-i Instruments,” on page G-3).
To Next Page
Loading...
