To Next Page

To Previous Page

EasyConnect RCT 1.0

Humphrey Field Analyzer II-

series User Manual 2660021145640 A

G-10

If you previously selected a shared folder type of HFA setup, enter the name of the shared folder

or select the

BROWSE

button to locate and specify the shared folder. Select

Create separate

subfolders for Work List and EMR/PMS Export

if you want to have separate subfolders inside the

shared folder for those features (Figure G.9). This may be required by some EMR products.

Figure G.9 Enter or Browse for Folder

A default share name for the folder will be created with the name “C:\CZM\HFA2i” if that name

is not already used. If you enter a folder name that does not currently exist, you will be asked if

you want to create it. If you enter or select a folder that is not currently shared, then the RCT

will make it sharable.

Note: The RCT only allows you to create a shared folder on a local drive.

The RCT will obtain the computer's name and IP address to set up the selected instruments.

If they do not already exist, the RCT will also create subfolders for each configurable feature

(Separate Worklist and EMR/PMS Export subfolders will only be created if you have that option

selected). The instruments will be configured to use these subfolders for the corresponding fea-

ture setup.

Table G-1 Subfolders for Configured Features

Feature Setup Subfolder Name

Archive/Retrieve Setup Archive

Data Export Setup Data_Export

EMR/PMS Export Setup EMR_Export (optional)

Worklist Setup Work_List (optional)

Select

NEXT to continue.

Zeiss Humphrey II-i series User Manual

Questions and Answers: